Tineco PURE ONE STATION FURFREE Series Vacuum Cleaner Manual

The Tineco PURE ONE STATION FURFREE is a state-of-the-art vacuum cleaner designed for pet owners. It features advanced smart technology, powerful suction, and a self-cleaning station that keeps your vacuum ready for use. With its lightweight design and versatile attachments, it effectively removes pet hair, dirt, and allergens from various surfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Smart sensor technology, self-cleaning station, multiple cleaning modes, HEPA filtration, and a variety of attachments for different surfaces.

Feature	Description
Smart Sensor Technology	Automatically adjusts suction power based on floor type and dirt level.
Self-Cleaning Station	Automatically cleans the vacuum brush and maintains hygiene.
HEPA Filtration	Captures 99.97% of dust and allergens, ensuring cleaner air.
Lightweight Design	Easy to maneuver and carry around the house.
Multiple Attachments	Includes tools for upholstery, crevices, and hard-to-reach areas.

Installation

Unpack and inspect contents. Place the self-cleaning station on a flat surface near a power outlet.

Connect the self-cleaning station to a power source.
Ensure the vacuum is charged before first use.
Place the vacuum on the station to initiate charging.

WARNING! Ensure the station is placed away from water sources to avoid electrical hazards.

First-Time Setup

Power on the vacuum; follow the app prompts for setup.

Download the Tineco app and create an account.
Connect the vacuum to Wi-Fi for smart features.
Follow the in-app instructions to customize settings.

CAUTION! Ensure the vacuum is fully charged before first use.

Specifications

Model: Tineco PURE ONE STATION FURFREE.
Battery: 2500mAh lithium-ion, up to 40 minutes runtime.
Charging Time: Approximately 4-5 hours.
Weight: 6.5 lbs (2.95 kg).
Filtration: HEPA and pre-filter.
Noise Level: 70 dB.
Power: 120V AC.

Controls and Settings

Access settings via the Tineco app or the vacuum's control panel. Features include power modes, battery status, and cleaning reports.

Remote: Power button, mode selection, and cleaning start/stop.

Connecting Devices

Connect the vacuum to the Tineco app for enhanced features.

Ensure the vacuum is powered on.
Open the Tineco app and follow the instructions to connect.
Ensure your smartphone is connected to the same Wi-Fi network.

Tip: Keep the app updated for the latest features and improvements.

Operating the Vacuum

To operate the vacuum, press the power button and select your desired cleaning mode.

Choose between Auto, Max, and Eco modes based on cleaning needs.
Use the attachments as needed for different surfaces.
Return the vacuum to the self-cleaning station after use.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the filters and brush roll as needed.

CAUTION! Always unplug the station before performing maintenance.

Regulatory Information

This device complies with FCC Part 15. For support, visit www.tineco.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery drained	Charge the vacuum for at least 4 hours.
Low suction power	Clogged filter	Clean or replace the filter.
Brush roll not spinning	Obstruction	Check for hair or debris blocking the brush.
App connection issues	Wi-Fi problems	Ensure the vacuum is within range of the router.

Reset: Use the app to reset settings if needed.

Service: 1-877-123-4567; www.tineco.com